Self-Leveling Decorative Epoxy Paint for Floors and Countertops – LIQUID MARBLE

ISONEM LIQUID MARBLE is a two-component, low-viscosity, solvent-free, self-leveling epoxy resin product with multiple indoor applications. It provides a unique decorative finish with a marble effect, thanks to its reflective pigments and aesthetic effects.

✔ Creates a glossy, marble-like surface
✔ Resistant to mechanical stress, abrasion, and chemicals
✔ Waterproof and hygienic, easy to clean
✔ Solvent-free, with excellent penetration properties
✔ Easy to apply, with high adhesion and simple maintenance

Areas of Use

• Indoor marble countertops

• Concrete floors in:

  • showrooms

  • offices and homes

  • common areas in shopping centers

  • shops, laboratories

  • food, chemical, and pharmaceutical industries

⚠️ Product intended for indoor use only.

Technical Specifications

• Density Component A (25°C, g/mL): 1.10 ± 0.10

• pH (25°C): N/A

• Viscosity Component A (25°C, mPa.s): 1500 – 3500

• Solid content (% weight): N/A

• Water transmission rate (kg/m²·h⁰,⁵): < 0.1 (Class W3)

• Adhesion strength (N/mm²):

  • Rigid systems, no traffic: ≥ 1.0

  • With traffic: ≥ 2.0

• Vapor permeability (m): 5 ≤ SD ≤ 50 (Class II)

• Touch dry: 8 – 10 hours

• Full cure: 7 days

• Pot life of mixture (23°C): 30 – 40 minutes

• Solvent: Organic solvent

• Fire reaction class: Cfl S1

• Color: According to ISONEM Liquid Marble color chart

Application Procedure

Surface preparation:

• Surfaces must be dry, clean, free of dust, oil, dirt, or defects.

• Concrete and raw wood should be primed with ISONEM EP PRIMER (0.250 – 0.400 kg/m²).

• Marble countertops do not require primer, but must be sanded with abrasive stone.

Mixture preparation:

• The product is supplied in ready-to-use sets, according to the mixing ratio.

• Component A should be mixed for 3 – 4 min (300 – 400 rpm).

• Add all of Component B and mix for a minimum of 3 min until a homogeneous mixture is obtained.

• The mixture should be used within 30 – 40 minutes.

Application:

• Apply with a roller, brush, or sprayer in a single coat.

• For additional thickness, a second coat can be applied after the first one dries.

• For a marble effect, 1–2 hours after application, use a sponge roller, epoxy roller, or "butterfly" roller.

• Partial curing time: 18 – 24 hours.

• Full cure: 7 days.

Application Conditions / Limitations

• Application: in the same direction as the first coat

• Surface humidity: dry

• Primer needed: ISONEM EP PRIMER (for concrete and raw wood)

• Product consumption: 0.6 – 1.0 kg/m²

• Coverage: 2.5 – 4 m² / set

• Application temperature: 5 – 35 °C

IMPORTANT

• The applied surface must be protected for 24 hours from rain, water, mechanical shocks, or loads.

• The product is exclusively for indoor use.

• Indoors, it must be protected from direct sunlight exposure.

Packaging & Storage

• Packaging:

  • 2.5 kg set (A: 1.6 kg + B: 0.9 kg)

  • 5 kg set (A: 3.2 kg + B: 1.8 kg)

• Storage temperature: 5 – 35 °C

• Shelf life: 24 months (in original, unopened, undamaged packaging)

• Storage conditions: dry and cool place, tightly closed, away from heat and fire sources