Anti-mold and Anti-humidity Solution for Walls – MS 82

MS 82 is an extremely powerful, synthetic insulating solution, modified with polymers and special substances to eliminate humidity, dampness, and mold problems on the interior walls of buildings.

✔ Can be applied on wet or dry walls, painted or unpainted
✔ Prevents and eliminates the formation of moisture and salt efflorescence
✔ Provides excellent adhesion on all types of surfaces
✔ Resistant to UV, water, rain, salt, and chemicals
✔ Does not crack, swell, and provides long-term protection

Through its active compounds, it penetrates walls and eliminates moisture retained in their structure.

Areas of Use

• Wet, painted or unpainted walls

• Facades and interior/exterior foundation walls

• Basements, garages, and cellars

• North-facing walls and damp areas

• Tunnels and concrete or plaster walls

• Solving problems caused by humidity and dampness

Technical Specifications

• Density (25°C, g/mL): 1.40 ± 0.10

• pH (25°C): N/A

• Viscosity (25°C, mPa.s): 2000 – 4000

• Solid Content (%): 70 ± 2

• Water Transmission Rate (kg/m²·h⁰·⁵): < 0.1 – Class W3

• Adhesion by pull-off test (N/mm²): ≥ 1.0 (rigid system, no traffic)

• Water Vapor Permeability (m): 5 ≤ SD ≤ 50 – Class II

• Touch Dry: 24 hours

• Full Dry: 72 hours

• Solvent: Organic solvent

• Reaction to Fire Class: B fl S1

• Color: Off-white

Application Instructions

Surface Preparation:

• No primer required.

• Walls can be damp, dry, painted or unpainted.

• Areas affected by dampness or exfoliating parts must be cleaned.

• If there are bulges, these should be removed, and the surface leveled with repair mortar.

Application:

1. Mix the product well for 3 minutes.

2. Apply undiluted, with an epoxy synthetic roller, brush, or sprayer.

3. Apply 2 coats, with a drying time of 24 hours between coats.

4. Ensure good ventilation of the space.

Application Conditions / Limitations

• Application: horizontal / vertical

• Substrate Moisture: dry or damp

• Consumption: 500 – 600 g/m² (for 2 coats)

• Coverage:

  • 1 kg → 1.5 – 2 m²

  • 5 kg → 8 – 10 m²

• Recoat Interval: 24 hours

• Application Temperature: +5 °C – +35 °C

IMPORTANT

• Treated surfaces must be protected from rain, water, and mechanical shocks for at least 24 hours after application.

• During work, gloves, mask, and safety glasses are recommended.

• Ensure ventilation of indoor spaces during application.

Packaging & Storage

• Packaging: 1 kg and 5 kg metal cans

• Storage Temperature: 5 – 35 °C

• Shelf Life: 24 months (in original, sealed packaging)

• Conditions: store in a dry, cool place, away from heat and fire