Transparent Waterproofing for Floors 5 liters – BD

BD penetrates the floor or joints without forming a film on the surface, ensuring complete waterproofing protection.

✔ It is transparent and does not alter the surface appearance.
✔ Allows the substrate to breathe, is non-flammable, and resistant to UV and solar radiation.
✔ Can be applied both indoors and outdoors, in a short time.
✔ Easy to apply, economical, and durable.
✔ Compatible with all types of absorbent surfaces or those with waterproofing issues.

Areas of use

• Absorbent surfaces such as: plaster, concrete, AAC, screed.

• In areas with low absorption, unabsorbed residues must be wiped off to prevent stains.

❌ Not recommended for application on non-absorbent surfaces such as ceramic, marble, or granite (may leave marks/glazes).

Technical specifications

• Density (25°C, g/mL): 1.00 ± 0.10

• pH (25°C): 7.0 – 9.0

• Viscosity (25°C, mPa.s): 0 – 500

• Water transmission rate (kg/m²·h⁰,⁵): < 10 mm (Class I)

• Adhesion by pull-off test (N/mm²):

  • Absorption rate < 7.5% compared to untreated sample

  • After immersion in alkaline solution: < 10%

• Vapor permeability (m): > 10 (Class II)

• Touch dry: 3 hours

• Full cure: 24 hours

• Solvent: Water

• Fire reaction class: B S1 d0

• Colour: Transparent

Application procedure

Surface preparation:

• Loose or cracked areas are removed, and voids are repaired.

• The surface is cleaned of dust, oil, rust, and other impurities.

• Degraded joints are renewed, loose tiles are fixed, and peeled sealants or silicones are replaced.

• If the floor has been washed, allow it to dry completely before application.

Application method:

• Shake the product well before use.

• Pour into a plastic container and apply evenly with a brush or roller.

• On surfaces with low absorption (e.g., ceramic, marble), residues should be wiped off after 1 hour with a damp cloth, without detergents.

• Apply in 2 coats, using the "wet on wet" method – the second coat should be applied within a maximum of 1 hour after the first.

• Finally, smooth surfaces (ceramic, marble) should be wiped again with a damp cloth.

Application conditions / Limitations

• Application: horizontal

• Surface humidity: dry

• Number of coats: 2

• Consumption: approx. 200 mL/m²

• Coverage: min. 25 m²/5 L canister

• Time between coats: max. 1 hour

• Recommended tools: brush, roller, sprayer

• Application temperature: 5 – 35 °C

IMPORTANT

• The surface must be clean, dry, and free of impurities.

• Swollen and detached areas must be completely removed.

• Treated surfaces must be protected from rain, water, mechanical loads, and shocks for 24 hours after application.

Packaging & Storage

• Packaging: 5 L PE canister

• Storage temperature: 5 – 35 °C

• Shelf life: 24 months from the manufacturing date, in original, unopened, and undamaged packaging

• Conditions: keep tightly closed, in a dry, cool place, away from heat sources and fire